Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Here's a link to H2erics build, another fine piece of work, if I remember correctly he even had Magnesium sliders made!, could be some useful info in there for you 👍http://forums.sohc4.net/index.php?topic=94588.0
Had a good wander around Stafford today! Met up with some good contacts, especially for the Yam project. Also met up with a CR guru and purchased these bits:Sand-cast side cover and fuel tap: Venhill '888' quick action throttle:The side cover is just a rough casting so needs a lot of loving, however apparently they were pretty poor when supplied new in the kit in the 1970s. I will trim off the gates and sprue, fly cut a face seal and drill for bolting on. I would like to CNC my own one of these but that will have to go on the back burner for now. The fuel tap, is ready for bolting on! I am still going to machine one of these though. And the throttle, its a starting point. I will either run this as-is but stripped of the anodising, vibro-polished add with some period fastenings. Or I am going to make a new throttle as a replica of the original kit style one.CheersCR21
Quote from: CR21 on October 14, 2017, 09:07:23 PMWho did you get the tap from Scott?Sent from my MotoG3 using Tapatalk
It arrived OK then?
Fuel Tap of great interestmay I ask where it comes from ?
CR21, Phil Ward in Wigan linked me up with this thread and I must say, it made a very interesting read, good luck with getting it up and running.Sam.