Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Order some MEK (Methyl Ether Ketone) which is an industrial solvent. It will eat the sealer (and any paint so be careful if you want to preserve the paint).
I used it neat on a tank with a Kreeme liner. Left it in for a couple of hours, swilled every 30 mins and then drained through a coffee filter for re-use. You may want to de-grease the tank first so the MEK can get straight on to dissolving the liner without a grease barrier to deal with.
That's the grease nipple for the swingarm pivot assy. Bracket is unique to K6 and acts as a hose guide - can't remember which hose..
Thanks for the answers chaps.Is it best to go oem for things like bushes and bearing or are there better alternatives?Seen some recommendations for bronze swingers bushes and seen these on fleabay:http://www.ebay.co.uk/itm/Swing-Arm-Bearing-swing-arm-bushes-bronze-bushes-2005180045061-/282021721757?hash=item41a9cdf69d:g:IYEAAOSwKfVXJBTEliterally a quarter of the price of the OEM ones from david silver, but I'm not one to waste money on crap even if it is cheap crap.
The collar is frequently more worn than the bushes and costs even more