Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Turn the base gasket over, it should fit better If you get the rocker cover gasket on the wong way wound it will leak
https://www.cromwell.co.uk/shop/lubricants-and-chemicals/industrial-cleaners-and-solvents/amberclens-anti-static-foaming-cleaner-400ml/p/AMB7010070S?utm_campaign=pla+-+&utm_source=google&utm_medium=shopping-pla&utm_keyword=AMB7010070S&istCompanyId=6aa6787b-063e-4414-802d-129f235df603&istItemId=aqrxtqtxw&istBid=tzttThis is useful for the "Graphogen on the carpet" also for getting the smell of puke out of car interiors if you've transported young children. Although I could see too many occurrences of Graphogen on the carpet leading to lacking the opportunity of "practicing" for children.
I would have thought the super slippery stuff in the Graphogen would find its way into the clutch and make that super slippery, or am I over thinking again?
Hope you cross hatched the bores, otherwise it will smoke like a chimney
Just waiting for a new torque wrench to arrive as I expect my current one has had it.Am I likely to run into leaky head gasket issues if I end up backing off a few of the fixings, it's probably not massively over tightened but I don't want to warp anything..
you need to powder coat after truing/building the wheels or it will crack when you attempt to mtighten a spoke
As far as I remember, when I left the lump I had the cylinder head on but hadnt got the cam shaft on properly as I didn't have the contact breaker assembly on to mark the timing. It's been a while now since I took it apart - how the heck does this go back on??
What instructions do you need, the timing unit or re timing the camshaft? Sent from my X6pro using Tapatalk