I've been having indicator dramas, last week I noticed the right hand side had stopped working, nothing lighting up at all.
With the engine stopped you can hear the flasher relay ticking away frantically. I tried the usual checking the connectors were all present and correct in the headlamp, made sure everything was a tight fit, and it seemed to correct itself temporarily. Today it was back to hand signals only on the right unfortunately.
I swapped the orange and blue feeds from the handlebar switch, the problem stayed with the right hand side lamps, though the switch positions were now reversed, so its not the feed from the switch.
Disconnecting things one at a time, the speedo bulb and the front right work fine, but the load doesn't make the relay flash.
Connecting the rear right causes all other lights to go out and the frantic 'ticking' from the relay.
I checked the connections at the rear indicator bulb, they weren't great, but resoldering and cleaning everything up made no difference. Until I get some extra wire, I cant test for voltage / continuity, cos my multimeter leads don't reach from the headlight end of the light blue wire to the connector at the back of the seat.
It cant be a broken wire as connecting it makes the ticking happen, but I'm thinking a high resistance somewhere. However its all one wire through the loom AFAIK, or is there another connector somewhere I can check? Is there a spare wire I can pinch or at least try? I suppose I should also connect the rear right to the left side indicator switch to see if the problem swaps sides.