Well after 3 carb tear downs and cleans I just can't get the accelerator pump to work..it seems to pump well up through the one way valve in the top of the float bowl when the rod is pushed by hand , you get a good jet of fuel, and running carb cleaner through the little brass jet in the carb body with a syringe results in a jet from each of the four posts but put it all together and you get nothing
, I've checked and double checked the actuator arm gap... there appears to be a home made o ring between the float bowl and body in the hole where the valve is but didn't seem to obscure the valve... I'm starting to pull out my hair with this one now, any ideas great fully recived