Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Quote from: Rob62 on January 08, 2018, 10:56:59 PMQuote from: Trigger on January 08, 2018, 10:47:52 PMBe careful with ordering a new master cylinder kit, a lot are listed but the wrong size. The two holes in the master cylinder need to be clear Cheers Trigger. Actually i already moticed that one of the two holes in the base of the reservoir looks to be blind drilled which seems a bit odd, the other goes straight through into the bore.... inside the cylinder is quite clean and rust free it was only the circlip groove that was rusted in. Ill get my magnifying glass out and have a closer look at those holes....You need a wire from a wire brush to poke in the hole that you think is blind, as it is not a blind hole
Quote from: Trigger on January 08, 2018, 10:47:52 PMBe careful with ordering a new master cylinder kit, a lot are listed but the wrong size. The two holes in the master cylinder need to be clear Cheers Trigger. Actually i already moticed that one of the two holes in the base of the reservoir looks to be blind drilled which seems a bit odd, the other goes straight through into the bore.... inside the cylinder is quite clean and rust free it was only the circlip groove that was rusted in. Ill get my magnifying glass out and have a closer look at those holes....
Be careful with ordering a new master cylinder kit, a lot are listed but the wrong size. The two holes in the master cylinder need to be clear
Did notice that your speedo has gained 5MPH