Hello All,
I once again need you help and guidance!
I am experiencing a hanging idle at 3000rpm. When warm the engine hangs at 3000 if rev'd, or rises on its own once hot to hang at 3000. I have been searching through different configurations but am yet to be successful. Once rolling she rides well with lots of power but at idle and slow speeds hangs at 3000.
Current setup;
Open exhaust
Air pods (i understand this is a big part of the issue but they are staying)
Keihin carbs; 130 main jet, 42 slow jet, needle clip 4(one up from bottom)
I have tested using the air screw - 0, 1/4, 1/2, 3/4, 1, 1 1/4, 1 1/2, 1 3/4 and 2 turns out. It seems to run best at 1 turn out but still hangs with all turns.
The plugs after idle are normal - not sooty. They is no smoke coming from the exhaust but i do think that it may still be running lean at idle hence the hang.
You thoughts would be welcome!
Tom
Sent from my iPad using Tapatalk