Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Looking really good John.My friend had one years ago. He had tried inexpertly to service his bike and, on his way to see his girlfriend, called in to see me saying it wasn't going quite as well as it had before. Upon inspection, it became evident there was no compression in the right cylinder. We set to work straight away, literally burning our hands taking out the engine. Quickly, we discovered he had advanced the ignition so much the piston had holed. After a quick trip to the local Honda dealer, he came back with a new piston and set of rings etc. and within a very short space of time I reassembled the engine, set the timing correctly, and by the time we put the engine back in the frame it was still warm and he was able to resume his journey.
I'm sure you will be fine, my friend was terrible, shouldn't have been allowed near spanners...
Shouldn't be engine oil in there, there should be an oil seal in the cam carrier bearing.Sent from my X6pro using Tapatalk