Does it run OK at part throttle and above ? If it's just idle where you have the problem, you may have gone the wrong way with your idle jets. It sounds counter intuitive, but other people have had more success with smaller .38 dle jets with pod filters - it's linked to the fuel not emulsifying sufficiently in the idle circuit with the larger jets, so you may want to try the std .40 jets and then find some .38s if it seems a bit better. Having said that, the changes are quite small and I would have expected poor running, stalling after a few seconds if the jetting was incorrect - if it's not running at all, then you may have other problems - air leaks, throttle slide settings etc. Did it run before and idle OK ? Have you bench set the carbs and closed throttle slide position etc ?