Hello, I just received my clocks back from being rebuild, the internals were cleaned and the dampers refilled, also had new glass and faces fitted.
I put new cables on from David silver went for a ride and the speedo and Rev counter is still wavy.
The speedo is reading a bit high and when going quicker, say I am going 60 and I accelerate the speedo will shoot up quick and go to like 80 and go back down and wave about. (clutch is not slipping) it does this more at higher speeds, it seems a bit more stable at slower speeds.
And the Rev counter is wavy and it will fluctuate a lot doing about 6k it will drop down to 5k bounce about and go back to 6k and when going quick it doesn't go up smooth.
I had a look at the speedo gear were the cable slots in with the wheel on and it is a bit wobbly, is it meant to be?
Also put a drill on the end of the cable and the needles seemed to go up smooth.
Does anyone know what else could be causing this?
Spent quite a bit of money on these, they have been wavy for ages getting a bit annoyed with them now.