Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
They are not meant to fit flush it tight together Sye, they will crack if you try. Have it tight at the front ie, facing the front wheel and the gap at the back, so water doesn't get in.
If you mean the circular switch it is an on/off not high/low and starting from end it is grip; indicator/horn with wires inside bars then a gap then on/off with wires outside bars
The ones in the link are just repro bars for the CB550 F. If your wires are running on the outside of the bars, the switch gear is the wrong ones or someone had broken a lump out to feed the wires .
Same bars >>> https://www.davidsilverspares.co.uk/CB550F2-SUPER-SPORT-1977/part_188996/
Quote from: Trigger on September 30, 2018, 12:59:04 PMSame bars >>> https://www.davidsilverspares.co.uk/CB550F2-SUPER-SPORT-1977/part_188996/If they are the same as the 500 I will buy them, thanks Graham.