Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
What are they like on sprocket position as it may just be the bearing retainer sleeve is different. Loads of people are selling 500T hubs as 450, is it just the K0 that's different to the rest. have you got a later 450 hub you can check against the K0. They can't be vastly different as I know it's possible to fit a 500T engine straight into a bomber. Maybe they beefed it up at some point to stop the cracking. Been watching one all week advertised as cb450/cl450/500T that the seller says has no cracks, he's also sure it will fit so I have put a sniper bid on. Finishes in 16 minutes so I may be the owner of more scrap iron. Cheers.
I just checked and the K1 5-Sp hub and CB500T rear hubs are both ---292--- part numbers. Original was -000 but superseded to -010 500T part. for K1
Quote from: AshimotoK0 on November 30, 2019, 11:28:32 PMI just checked and the K1 5-Sp hub and CB500T rear hubs are both ---292--- part numbers. Original was -000 but superseded to -010 500T part. for K1You are correct Ash. They moved the sprocket over at the beginning of the 5 speed. Just taken me 2 hours to establish that, then logged on to let you know to find you had already figured it out. Strangely I have seen an article some time ago about fitting a 500T engine into a bomber. They said it went straight in without any other modifications, must be eating drive chains. Unfortunately I won the auction last night so we probably now have yet another useless rear hub, only cost £26 including postage so not too bad. You never know it may be a bomber hub, not.
Hi Roy Arch Stanton & Sean are the same person :-), cheers Mick.
Quote from: mick on December 01, 2019, 12:02:34 PMHi Roy Arch Stanton & Sean are the same person :-), cheers Mick.Ha. Well I never.
Quote from: mick on December 01, 2019, 12:02:34 PMHi Roy Arch Stanton & Sean are the same person :-), cheers Mick.Ha. Well I never. Sent from my Pixel 3a XL using Tapatalk
Quote from: royhall on December 01, 2019, 12:52:08 PMQuote from: mick on December 01, 2019, 12:02:34 PMHi Roy Arch Stanton & Sean are the same person :-), cheers Mick.Ha. Well I never. Sent from my Pixel 3a XL using TapatalkSorry Roy .. I should have been more specific...just like to call members by their proper names when I can ... a seeming impossibility with Hairygit though ... I reckon he's called Rumpelstiltskin Any news on the hubs from Sean? ... You are still welcome to a free slightly cracked one ... I reckon yours is far worse than the 3 I have. Feedback from Facebook group is that unless crack goes through hub it will be OK and there are lots out there being used that have slight cracking ... not that I am happy with that or agree but just reporting back from another group.