I am rebuilding a 1971 CB500K0 and have not been able to get a hinge or catch / lock for the seat. Bizarly, I have bits of a catch, but not the main part that bolts to the frame. I have made a hinge as a (hopefully) temporary measure, but I suspect the legs are too long, making the seat sit higher than it should. Could anyone advise the height of the retaining pin holes above the seat base and if both legs are the same.
I do have a CB550 seat catch / lock, but don’t have the bolt on plate that you need to attach that to the frame. I could end up having to improvise as the only CB500K0 catch I have found so far is in the US and would cost more in shipping than the cost to buy the catch. I may modify the seat pan before I fit new foam / cover to allow me to fit either a CB550 sprung catch or the original CB500K0 hook type catch.
Many thanks in advance.
Raymond