Just finished restoring a CB750 Sandcast Seat (using Yamiya red foam and seat cover) and thought I’d share a few pics.
Essentially at that remains of the original seat is the restored seat base and hinges / latch.
The Yamiya kit is superb - but bloody expensive.
But, like everything I guess you have to pay top whack for top quality.
The fitting took me 3-4 hours (test fitting, measure twice, cut once etc..) but I’m pretty chuffed with the finished results..
I would say this is well within the capabilities of pretty much anyone - just requires patience, thought and the right approach.
Before:
![](https://uploads.tapatalk-cdn.com/20190327/eefc781e623bf039e78a8b6f5d640ea7.jpg)
![](https://uploads.tapatalk-cdn.com/20190327/c492c11b4bea65f057368c71a4758ca5.jpg)
![](https://uploads.tapatalk-cdn.com/20190327/6939764d2c74ac2f4f69eb078efb65ea.jpg)
After:
![](https://uploads.tapatalk-cdn.com/20190327/ab0b06c89afeb6b68f39714431ae775b.jpg)
![](https://uploads.tapatalk-cdn.com/20190327/035e49c26bf866922abdbaac301c2a5a.jpg)
![](https://uploads.tapatalk-cdn.com/20190327/3db4d767a6dd7fc70d5d788a922d729a.jpg)
![](https://uploads.tapatalk-cdn.com/20190327/71a475d78869fa7938fbc091badf5dcf.jpg)
![](https://uploads.tapatalk-cdn.com/20190327/f0f3087bed7b2f575917b269d95d2d40.jpg)