Author Topic: Backfire after rebuild  (Read 428 times)

Offline paulbaker1954

  • SOHC Pro
  • Posts: 702
  • I'll just be 5 minutes dear!!
    • View Profile
Backfire after rebuild
« on: May 30, 2019, 05:48:21 PM »
Just got the bike running again after new head gasket and some carb work

Getting a backfire about every 30 seconds from 1 cylinder

Not balanced carbs yet but just wondered if anyone had any ideas as to likely causes

Thanks all
If you think there's light at the end of the tunnel it's usually another train !!

2016 Yamaha MT09 Tracer
1971 Honda CB500 Four K0

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8271
    • View Profile
Re: Backfire after rebuild
« Reply #1 on: May 30, 2019, 06:44:57 PM »
If you bench synced the carbs before re fitting, i would look for an air leak first.
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal