Need some advice good people.
Took the carbs off today to check out the sooting up on 1, 2 and 4. 3 was ok.
Took bowls off, everything looked immaculate, put bowls back on.
Took diaphragm covers off and found 1,2 and 4 needles separated from their respective carriers. Retrieved very small spring and washers and reassembled them. Has to be said the o ring that holds them in place had seen better days. I will need to replace them at some point.
Anyway, confident that I’d found my fault, put it all back together and now engine won’t start, just cranks over and over, with the low fuel light on. (Only on when starter button pressed). Tank is full, fuel tap is on. There’s no fuel coming out of the fuel bowl drains.
I took the supply pipe to carbs off, no fuel coming through.
Took fuel pump off, connected to 12v supply, pump runs ok
Pump is not getting 12 v supply, why? What have I missed whilst refitting the carbs?