Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Ok thanks for the info. It's about 25mm too short which is annoying. I've emailed cognito Moto. How much longer is the 750 one? Are they the same diameter?
actually the k is a longer bolt as the footrests are mounted at each end and the f1 and f2 have a folding footrest on the right which is mounted on the frame.
You are building a a custom and that means all parts are non standard. If you mount standard foot pegs on the engine hanger bolt on a F1 or F2, the foot pegs will be too far forwards and too low.Sorry trigger yes that might help. (Attachment Link) The bike isn't at my place so can't take a close up now but you can see the cognito Moto rearset bracket. It's basically supposed to bolt on to the pivot bolt and the lower engine mount. Pivot bolt is long enough, lower engine mount isn't. Would help if you show a picture of what you are trying to achieve
I have a few engine bolts, if you can measure what length you want I can see if I have one.