I’ve fitted the K1’s headlight brackets and trial fitted the headlight bowel feeding the wiring through to ensure the wires aren’t too tight moving from lock to lock.
From the K1 wiring diagram I can see the left-hand indicator green wire connects to the same 4-way connector block as the headlight green wire. The right-hand indicator green wire connects to a 3-way connector block, even though the wiring diagram shows it as a 4-way?
This leaves me with a single green wire that appears to have come out of its connector, from the wiring diagram it comes
Edit:
from either Ground, the Regular or Alternator, I've just traced it back to the tacho bulbs!
Logic Common sense tells me it can only connect to the 3-way connector.
Grateful for some advice - hopefully the photo makes sense of what I’ve tried to explain.
Thanks
Andrew