Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
A question for those of you with USA bikes with the daytime light, does the tail light come on and stay on with that set up?
Yes it should but via a different circuit, not if UK RH switch has been fitted(lights on/off switch)
Hi Mark,Your bike is a US import which would once have had daytime running lights at the front with twin filament indicators. Have those wires from that system got mixed up with some others, especially earths? Can’t remember the colours of those though.Ian
Light blue/white and orange/white IIRC
Finally, whilst the UK Wiring Diagram is probably pretty accurate, it will have differences and you really need to source the correct one for your bike. Mattsz?
Somewhere a wrong wire is connected to a black wire OR a black wire is trapped.To sort this you need to be VERY methodical. Disconnect everything yes i mean EVERYTHING Take mutimeter set on low ohms and check reading when leads connected together, treat this as zero. Connect the black lead to a good earth and start testing with red lead first to all red points then turn ignition on and all black points.Report back as full procedure to much to assimilate in one go.You should be seeing infinite resistance(super high)