Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Have you tried ring Dave Silver and talking to them explaining your problem, i have always had good service there
Quote from: Bryanj on July 02, 2020, 03:08:12 PMHave you tried ring Dave Silver and talking to them explaining your problem, i have always had good service thereNo, I simply went to their website and found no listing for it. It's a good idea, though... when I inquired about their out-of-stock reproduction silencer, they gave me a future delivery date, but then got back to me saying they had a discounted "scratch-and-dent" one on the shelf, which was perfect for my needs.I suppose the next logical question is, if original Honda isn't available, is there a particular aftermarket brand that's known to be reliable?
Quote from: mattsz on July 02, 2020, 03:15:22 PMQuote from: Bryanj on July 02, 2020, 03:08:12 PMHave you tried ring Dave Silver and talking to them explaining your problem, i have always had good service thereNo, I simply went to their website and found no listing for it. It's a good idea, though... when I inquired about their out-of-stock reproduction silencer, they gave me a future delivery date, but then got back to me saying they had a discounted "scratch-and-dent" one on the shelf, which was perfect for my needs.I suppose the next logical question is, if original Honda isn't available, is there a particular aftermarket brand that's known to be reliable?Venhills are generally good quality. I have some SlinkyGlide cables on my bike (can't remember which ones!) and they work fine, good action.
Dont forget Silvers now has a US warehouse so may be able to get you one easier
I take it that you have examined the clutch basket and springs, on my rebuild there was deep grooves in the fingers of the clutch basket that made the action difficult, I obtained a used replacement that has helped. Assuming all adjustments are correct, have you got the correct springs, have you measured them. Also, I route the cable through an eyelett as per the routing guide it didn't have one when I bought the bike.