Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Yes, can't say I was too impressed either.Silencer arrived and is a nice finish but also had a couple of issues with it...Same problem with the gasket - after a 10 minute session of self-doubt determined that it was simply too thick so had to thin the gasket down (messy) to get it in.
Matt,I looked at opening the tabs but decided this was likely to crease and maybe damage the chrome as hard to do neatly. It also seemed that the problem is the gasket rather than the silencer so I just ‘peeled’ a bit off the outside of the gasket with a Stanley knife, trying to keep it as even / round as possible.Messy but seems to have worked OKGood luck with your oneCheersAndy
Sorry for the issue with the gasket received. Yes this is something we are fully aware of. If you pull out very slightly the slits in the muffler so the gasket fits in, once this has been done you should now be able to a make a perfect seal.