Hi, this ones got me wondering..
Can't get the indicators to work. No idea if they ever did, so what should I be checking to trace any faults?
The wire to the relay has 3 leads, but only 2 are used - that is the same as the manual shows. I've connected it the way it was when I stripped it down and nothing happens. Tried connecting the spare wire and as soon as the ignition is on you get a very rapid 'chattering' from the relay, and it does exactly the same if I just connect the relay across the battery, so that suggests the 'spare' wire (green in this case) is providing permanent 12v.
I would assume that when I switch the indicators on it should provide 12v to the relay but with a multimeter there is no voltage from the 2 leads that are feeding the relay, whatever way the switch is (left/right/off etc).
What checks can I make on either wiring or the relay?
(the indicators work when 12v is put through them so they are OK)
Thanks, Phil