SOHC.co.uk Forums > The Black Bomber Board

Tacho cable clip.

<< < (2/3) > >>

AshimotoK0:

--- Quote from: royhall on September 16, 2020, 08:39:32 PM ---Thanks Ash. No rush stick it in with the header pipe if it ever returns, still not got the headlight rim back 9 days after I paid for it.  BTW I couldn't use the scabby header it wouldn't fit the silencer. I think it is so rusty under the chrome it's size has swelled up by about 8 thou, there's also a big hole in it just in front of the clamp. You could probably cut it off and weld some new pipe in place. Will just wait for the real one to return, no rush now as this riding season is nearly over.

--- End quote ---

Chomer is dealing with you direct on the rechromed pipe Roy. Just bin the other scabby one. Bit confused though .. surely Mr. Silvers pattern silencers still use the insualting packing (item 9 in image below) ?

[ Guests cannot view attachments ]

royhall:
No there's no packing required. The silencers are not really for a K0 they are for a later model and they slip straight onto the header pipe. The pain is the rear brackets don't fit off either the bomber or the later versions so I am mid way through making bespoke stainless ones. They shouldn't make out that these are Bomber exhausts because there not. Control cables have become another problem as they advertise them for a UK bike but  they are all too long, clearly made for the higher bar USA version. Not one supplier can tell you the length of the cable when ordering. A fairly poor state of affairs. I may end up having special cables made for the front brake and clutch if the latest purchases don't fit, am trying a brake cable for a CB175. Thanks for the tacho clip Ash let me know what the postage costs you.

AshimotoK0:
Postage is free Roy .... a Jewish stamp collector gentleman and ex-colleague of Cathy flogged me a load of stamps cheap as they are pretty worthless (other than their 'real' stamp face value) since the internet came along.

I will check the control cables I got NOS for my own bike plus in my stash there is a plastic box full of old & used cables .. bound to be Bomber ones in there to compare and they were all off Briish models.

royhall:
I have all the original cables to compare. Ironically 4into 1 in America do a full set of short cables for the UK bike unfortunately they are black or it would be problem solved. I am told the ÇB175 cable is just right for the bomber, will let you know. Cheers.

AshimotoK0:

--- Quote from: royhall on September 17, 2020, 07:40:54 AM ---I have all the original cables to compare. Ironically 4into 1 in America do a full set of short cables for the UK bike unfortunately they are black or it would be problem solved. I am told the ÇB175 cable is just right for the bomber, will let you know. Cheers.

--- End quote ---

OK intersing to know if CB175 fits ... I think the K1 silencers also have the insulator Roy ..They are just missing the K0 fron bracket (the Bomber in the DS museum has K1 silencers with  K0 brackets bodged on) ... It is probably just DS and Co. doing a 90% correct job as usual .. Grrr !  it really bugs me that nobody seems to repro things properly after spending a small fortune on tooling.

Navigation

[0] Message Index

[#] Next page

[*] Previous page