Hi all,
Having to top up folk oils (K2) as a leak on one side through the cherry treated copper washer 🙁...
Rather than drain / refill, can anyone advise me the distance of oil to top of Stanchion, and whether springs in/out, fork collapsed or extended.
(SeanSD recently advised 140mm... but went on to add the below, which has kinda put me off (sorry Sean!)
Cheers,
Simon
“I’d be interested to hear what others think of this, because after replacing the springs and shocks (IKON also) the bike developed a severe head-shake at about 35-35kph if I took one hand off the bars. This quickly settled and at higher speeds it was fine. I have yet, 20,000km later, to solve this problem, so any ideas welcome. I have just rebuilt the forks completely while replacing the seals, so here’s hoping 🤞”