SOHC.co.uk Forums > CB750

Exhausted working this problem.

<< < (3/3)

Grumpyfck:
I will and thank you again. I have glean much from reading back on stuff here. Regretfully my only contribution is asking questions. Be few days before I can get at again.

Grumpyfck:

--- Quote from: K2-K6 on November 01, 2020, 10:04:53 PM ---Technically that's the right way to pair a 4 cylinder into 2, most that made them didn't bother but seem to remember Jardine promoting that as their selling point in the dim and distant past.

We'll find out though,  let us know how you get on.

Got at it again today, had a serious google of Jardine models and this on looked to do 1+2, 3+4. Finally figured out the down pipe positions and worked out with side stand removed it fits, will need a little massaging but it does work. Simplest solve would be a bolt on side stand re positioned. Keeping the ability to go back to original when exhaust replacement in the future. Cheered my weekend up properly.

--- End quote ---

Rob62:
Are they like these? These are jardine 4 into 2’s. As you can see the 2 and 3 cyl go to the left pipe and the 1 and 4 go to the right..

Rob62:
They are available by the way... if anyone wants them  :)

Grumpyfck:

--- Quote from: Rob62 on November 22, 2020, 12:02:44 PM ---Are they like these? These are jardine 4 into 2’s. As you can see the 2 and 3 cyl go to the left pipe and the 1 and 4 go to the right..



--- End quote ---
No, they are definitely 12 - 34, have them just about there now. The problem was side stand position mainly. .

Navigation

[0] Message Index

[*] Previous page