Part Suppliers

[markburstow]

You'll be pleased to know that the 400 is in fine fettle - it really is very close to MOT readiness - astonishing really (all things considered)

I need a few bits and bobs for the restoration though and, given that its flamin' freezin out there at the moment, I am researching sources of things like mudguards and exhaust.


Have any of you guys used this outfit

http://www.davidsilverspares.co.uk/parts/

And if so, how did you find the experience?  Decent quality et al...................?

Or, have you any other thoughts?

Thanks for the help in advance


M

[hector2800]

DS is much loved and appreciated by many on this forum. Also try cmsnl.com from Holland but watch the postage costs. Then there's the dreaded e-bay which we often moan about but use quite a bit. Many use people in the US but I haven't had much success myself. And last but not least a mention on here sometimes turns up trumps.

[Seamus]

Used DS for years. Very helpful and knowledgeable folk. Nothing bad to say about them.

[SteveD CB500K0]

I've used DS for years.

If you call them (instead of ordering on line), you'll find that they really know their stuff and can recommend parts from other models that fit...

[BigAl (Alan)]

I have used DS & CMSNL both have provided good service. ( CMSEL Vat is 19% + pp)

Alan

[Spitfire]

Could not have restored the F1 without DSS, CMS NL are also very good but expensive, for bolts I used Custom Fasteners, not cheap but great service.

Cheers

Den

[Mark G]

Used Dave Silver myself, no problems and will use again

[AshimotoK0]

+1 for David Silver been using him since he 1st started from his home in 1986!! Prices then were:

[dave400]

Just make sure the part you order is a 400/4 part and not a will fit part made by Honda 

Cheers 

[Spitfire]

Yes I bought the F2 tank and seat from David Silver from an ad in MCN in 1986,

Cheers

Den

[markburstow]

That is very helpful - many thanks

Mark