Just a thought on wiring harness regarding repair/replace. I have read different snippets regarding replacement harness’s for different models, problem being to get an exact copy of what was on the bike originally. When I restored the 550k3 I opened up the harness by removing all the tape laid out all the wires and examined cleaned and checked for hardening etc, repaired replaced wires and plugs appropriately then re taped and ended up with a descent harness that I knew was not hiding any skeletons. The thing is I would do the same with the 750 unless there is a good reproduction harness on the market. I know there are several suppliers out there, anybody had any experience with aftermarket harness’s for the 750 in particular?