Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Which bit are we talking about please. You have me worried as I don’t recollect seeing this in my rebuild….☹️
The bare rods seemed ok but will check. Interestingly, i was very careful to put the rod caps on the correct way round as per the manual, with the notch on the shell to the exhaust side of the engine and the markings on the side of the rods lined up. I removed the offending rod and re-assembled on the bench and the ends of the shells even by eye looked un even. I put it back on the engine and turned the cap round the "wrong" way, and hey presto a smooth turning rod. What do i do now, was it a fault from new? should i get another rod?