Plug caps for CB750 K3

[sim2011]

Hi Everyone
Just trying to do a bit of shopping for my CB750K3 before it arrives.
I'm going to replace the plug caps with black NGK 5 ohm resitor ones and then run it with NGK D8EVX plugs, can anyone tell me the corrcet NGK caps to use for this model.

Anyone else used D8EVX plugs ?

Thanks

Simon 750K3

[Yoshi823]

The plug caps are 5000 ohms not 5 & are normally available from your local dealer. Here's the type...
http://www.davidsilverspares.co.uk/parts/part_29269/
http://www.davidsilverspares.co.uk/parts/part_29268/
Rather than using Iridium plugs on a 750K3 where you wouldn't notice the differance...only in your pocket, i'd suggest the standard plugs...
http://www.davidsilverspares.co.uk/parts/part_29289/

[sim2011]

Thanks Yoshi
I of course meant 5K ohm , managed to source some nice Balck ones on Ebay for

[Spitfire]

Here's a link to a good thread on CB750 plugs, had lots of fun with mine when I first started using the F1 after rebuild.
http://forums.sohc4.net/index.php?topic=63284.0
http://forums.sohc4.net/index.php?topic=57005.0

Cheers

Den

[sim2011]

Thanks everyone
I've decided to go with the ND plugs and found them at                    myscooterparts.co.uk
NIPPON DENSO SPARK PLUG - X24ESU - EQUIVALENT TO D8ES + D8EA   8   

[Spitfire]

Same ones that I went for, the bikes been good as gold since I fitted them.

Cheers

Den