Connectors

[oldchuffer]

I recently acquired a second-hand wiring loom for my "bag of bits" rebuild. As it will no doubt need work re the connectors can anyone recommend a decent supplier of bullet connectors and the like?

[Laverdaroo]

Try Mr Megapack,

I got some really good quality ones off him forcompleting the earths on mine. cheapand efficiet too

www.mrmegapack.co.uk

I got these but its worth ringing the chap and he'll make up kits to a size you need.

https://www.mrmegapack.co.uk/electrical-connectors-set-22987-p.asp

[oapcb400]

been a while since i rewired my 400f, but beware a lot of jap bikes use 4mm bullet connectors and from memory 400f use 3.5mm.

[philward]

If you are not in any hurry (although they didn't take that long when I ordered them)

https://www.ebay.co.uk/itm/152873651204?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

[sye]

I always use here:
https://kojaycat.co.uk/epages/950000457.mobile/?ObjectPath=/Shops/950000457

[Bryanj]

I used kojaycat as they do the 4 way connector(crimped to 1 plus 3 plug in)
You MUST have the proper crimpers and not the cheapo ones for the insulated type, i have had Ripaults 3000 for 40 yrs and they do come up on ebay occasionally

[Johnny4428]

Plus 1 on Kojaycat Bryan.

[Laverdaroo]

Kojaycat

thats going on the list