Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Hi Ted, Where do you get the industrial paint stripper? All info says this is hard to get?There is a local place 3mins from here that will do acid dip and vapour blasting, so will hit them up for a quote.The transmy countershaft has some corrosion, and it has a seal that isn't listed separately in the manual. Assume this is cleaned up and left as is generally?
I'm gonna admit being a total dummy. I did not notice the parts book, only the user/owners manual.I've been using CSMNL for parts lists, but the books look to be much better source.
Regarding your rusty output shaft end - I soaked my end bit in Evaporust. Sounds like Snake Oil but it works without eating onto the steel as it works by breaking the bond between good steel & the rust + iron oxide. I then dipped the clean part in gun blueing to passivate it.
Quote from: juitz on October 30, 2022, 12:16:25 PMI'm gonna admit being a total dummy. I did not notice the parts book, only the user/owners manual.I've been using CSMNL for parts lists, but the books look to be much better source.David.... Could you read your emails please. Ta