Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Its an odd size and hardened from memory[/thankyou Bryan
I was short of this washer but a member had a spare one but spotted this on ebay that includes the washer - expensive for a washer but better than none! The 'shim' is hardened - I can provide sizes if you want but before I got one, I struggled to find anything generically that was similarhttps://www.ebay.co.uk/itm/35385581182Brilliant, thankyou!
Here you go - OD 39.88mm - ID 12.25mm - 1mm thickThat's great and really helpful. Thankyou very much. I have a new lathe & mill arriving soon so will try to run one up - along with a few other parts!
Quote from: philward on April 18, 2022, 04:26:06 PMHere you go - OD 39.88mm - ID 12.25mm - 1mm thickThat's great and really helpful. Thankyou very much. I have a new lathe & mill arriving soon so will try to run one up - along with a few other parts!Problem is it's more of a hardened shim than a washer ... there are loads of places who do custom hardened washer/ shims in the UK. I had some made for my CB500/4 valves.
If it's the same as the K1 i have one somewhere.I could not find mine in the pile of bits that came with the bike, but you guessed it I managed to get hold of one and then found it.I will have a look tonight.
Quote from: paul G on April 20, 2022, 12:21:40 PMIf it's the same as the K1 i have one somewhere.I could not find mine in the pile of bits that came with the bike, but you guessed it I managed to get hold of one and then found it.I will have a look tonight.Same for all years Paul