I presently have a small digital voltmeter mounted on the handlebars between the mounting brackets.
It works just fine but in bright daylight you can't read the display.
Has anyone here fitted a small diameter Analogue guage -the old headlamp mounted units would be ideal you could fit a raised type unit in a suitable housing?
Hi Ted,
In terms of positioning I think it’s down to personal choice. If you look at my “Cockpit Upgrade” post you will see I accommodated 6 gauges. The AFR gauge was a little lager in diameter so would not sit as low as the others.
In terms of housings it depends what you can create with the garage resources you have available.
I am pleased with the good info that mine provide, and the wiring you have should work fine, but I would go for a gauge that has a damped movement, to avoid needle vibration.
Hope this helps.
Great that you are now on the road.
All the best
Dennis