Author Topic: CB400/4 engine and frame parts wanted  (Read 1409 times)

Offline Scottish Badger

  • Newbie
  • Posts: 47
    • View Profile
CB400/4 engine and frame parts wanted
« on: November 09, 2022, 12:00:27 PM »
Hi folks, I am trying to source the following parts, if anyone in the UK has any they would sell? I believe CB350/500/550 may use the same parts?

Qty 2 new (or as good as new!) Primary chain guides, Honda part number 23132-333-010
Qty 1 cable clip (listed as "Cramper B" for points cable) 32112-333-000
Qty 1 cable clip (listed as "Cramper A" for points cable) 32117-371-000
Qty 1 clutch cable guide / retaining wire 22872-356-000

Thanks,
Badger.

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6332
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #1 on: November 11, 2022, 10:21:44 AM »
Have you tried DS he only lists the popular parts in the model section so you need to enter the part number?

All the part numbers are in the parts book that you can download here in Aladdin's Cave section.

https://www.davidsilverspares.co.uk/

If you are after used parts look on this site & message for prices - good stuff at fair prices.

https://www.400fourbits.co.uk/
« Last Edit: November 11, 2022, 10:25:49 AM by McCabe-Thiele (Ted) »
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline Scottish Badger

  • Newbie
  • Posts: 47
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #2 on: November 12, 2022, 11:12:47 PM »
Yeah, tried putting the individual part numbers into the DS webpage, all come up as discontinued and unavailable sadly.

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6332
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #3 on: November 13, 2022, 10:55:54 AM »
Folk here use the Kawasaki primary chain - much cheaper than the DS one.
For electrical connections try Kojicat.
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline taysidedragon

  • SOHC Master
  • Posts: 1347
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #4 on: November 13, 2022, 11:00:38 AM »
Hi folks, I am trying to source the following parts, if anyone in the UK has any they would sell? I believe CB350/500/550 may use the same parts?

Qty 2 new (or as good as new!) Primary chain guides, Honda part number 23132-333-010
Qty 1 cable clip (listed as "Cramper B" for points cable) 32112-333-000
Qty 1 cable clip (listed as "Cramper A" for points cable) 32117-371-000
Qty 1 clutch cable guide / retaining wire 22872-356-000

Thanks,
Badger.

Hi Badger,

I have those, except for the clutch cable guide. Trouble is that they are somewhere in a pile of boxes in storage while I sort out my garage. It could take a week or two for me to dig them out.
Gareth

1977 CB400F
1965 T100SS

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6332
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #5 on: November 13, 2022, 11:29:45 AM »
For the clutch cable guide if originality is not an issue the 500 guide 50462-323-000 is available at DS £8.69 I believe this part has been fitted by members on the 400 but not 100% certain.

Others here will confirm.
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline Scottish Badger

  • Newbie
  • Posts: 47
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #6 on: November 13, 2022, 07:37:24 PM »
Taysidedragon, that would be ace, thanks.
I haven't started to strip the bike yet - I'm trying to go through everything and make sure I have all the little missing parts and wear-items ready for when I do start the full rebuild.

Offline taysidedragon

  • SOHC Master
  • Posts: 1347
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #7 on: November 13, 2022, 09:25:20 PM »
Taysidedragon, that would be ace, thanks.
I haven't started to strip the bike yet - I'm trying to go through everything and make sure I have all the little missing parts and wear-items ready for when I do start the full rebuild.

I'll let you know when I find them 👍
Gareth

1977 CB400F
1965 T100SS

Offline Scottish Badger

  • Newbie
  • Posts: 47
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #8 on: November 13, 2022, 09:55:39 PM »
Hi Ted, what's the Kawasaki primary chain you speak of?  I had no idea there was an interchangeable one?
Cheers.

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6332
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #9 on: November 13, 2022, 11:39:19 PM »
I bought my Primary Drive Chain from a link on here I think it was MSP Kawasaki Part - I can't find my invoice but someone here will point you in the right direction I'm sure.

Unusually I did not record the part number in my build log.

For the 500 it is 92057-1011.
« Last Edit: November 13, 2022, 11:54:20 PM by McCabe-Thiele (Ted) »
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline Bryanj

  • Grogu
  • *
  • Posts: 10826
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #10 on: November 14, 2022, 12:10:49 AM »
Same on 400

Offline Oddjob

  • SOHC Jedi
  • Posts: 4296
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #11 on: November 14, 2022, 12:32:02 AM »
It's also less than £50 for the Kawasaki one and around £126 in the UK for the Honda one.
Kids in a the back seat cause accidents.
Accidents in the back seat cause kids.

Offline Scottish Badger

  • Newbie
  • Posts: 47
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #12 on: November 15, 2022, 05:34:16 PM »
Yes, but what Kawasaki model uses the same chain as the 400/4?

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6332
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #13 on: November 15, 2022, 05:37:44 PM »
Yes, but what Kawasaki model uses the same chain as the 400/4?

This one ZX550-A1 plus the other models listed in the link at the bottom  the Kwaka p/n is 92057-1011

. https://www.motorcyclespareparts.eu/en/kawasaki-parts/920571011
« Last Edit: November 15, 2022, 06:00:57 PM by McCabe-Thiele (Ted) »
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline Scottish Badger

  • Newbie
  • Posts: 47
    • View Profile
Re: CB400/4 engine and frame parts wanted
« Reply #14 on: November 15, 2022, 08:21:26 PM »
Thanks Ted, much appreciated.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal