500 pilot light cord / bulbholder Part Number 37581-323-000

[McCabe-Thiele (Ted)]

The Pilot Light Mini Loom on my 500 has mostly rusty bulb holders - are there replacement bulb holders & rubber covers available anywhere?

[Oddjob]

https://z1parts.net/indicator-panel-dash-light-instrument-harness-honda-cb750-cb500/

[Trigger]

Z1 parts have been out of stock for the past 9 months.
Just fitted one from Yamiya, part number F228 

[Oddjob]

Alan on here sells a replica but it's expensive at £69.

[McCabe-Thiele (Ted)]

Z1 parts have been out of stock for the past 9 months.
Just fitted one from Yamiya, part number F228 

The site is priced in Yen or similar - what sort of cost is it with shipping Graham?

[Sesman]

Appears to be identical to the clocks harness.

[Oddjob]

It's about 74 euros Ted inc shipping but you also need to factor in it might get import duty.

[Oddjob]

Appears to be identical to the clocks harness.

Wires would be different colours Phil.

[Sesman]

I can live with that if they are long enough?

[Oddjob]

I'd imagine if they would reach to the clocks they'd reach to the bars. Might be easier to adapt a CB550 warning light panel bulb holder set. They'd be an extra indicator bulb but that should be easy to get rid of. Plus the wiring should be the same colours.

[Oddjob]

Should have searched for 550K1 as well Ted.

https://www.ebay.co.uk/itm/334479989120?hash=item4de08f9980:g:QwUAAOSwKXZisJpJ&amdata=enc%3AAQAHAAAAsCob2w2Fgq7bCYTTO9oPnt7d0ZnMyeBPqnY27jwUJm9TH5dbHj55AWKl9u0xM5OeLW5r3Sm%2FkUrIiBLtxx9gf5sjO79nARTVW2qz9bZbVXnn7UwLT7M0puZwNJD1gyhJUSIHFX9uXYGLJHHxgqtgBJejAPdhZKrquR70GXWos1mWjIwb7Ob1tzYh0x0kpcQUQ%2Fd52qhvSHlw9dBgf48bmHDxo72%2FzOnxse32TPLnVKRs%7Ctkp%3ABk9SR9CvpYydYQ

[McCabe-Thiele (Ted)]

If I can source the bulb holders by size I can solder new ones in place if I have a bulb type designation. I think I have a couple of the rubber covers from an old spedo unit.

Might be worth a trip into Derby to RF Potts as they look like something they might have in the loft spares section.https://www.ebay.co.uk/itm/144643401910

Something like this

[Johnny4428]

Ted I bought bulb holder rubbers for the 750 but they were no good! Too small. I ended up sourcing the complete harness ready to plug in.

[Oddjob]

By the time you've bought 4, soldered them in and such it would be cheaper and easier to buy that one off twowheelspares, you know that's going to fit.

[Sesman]

Unless the rubbers are as hard as marble. As they tend to be? I’ve been through his loop twice on clock rubbers/bulbs. Buy once, buy new.