Honda CB750 Sandcast, K0, K1 newly manufactured Carb Intake / Airbox Clamp Sets (sets of 12 incl. JIS screws)
In recent years I’ve been struggling to source good quality, used carb/airbox clamps for my Sandcast/K0 restorations.
These are the ‘flat’ finish, non-ribbed style clamps that were used on Sandcast, K0 and K1. K2/3 onwards used the ‘ribbed’ style.
The original Honda part number is: 17255-300-000
DSS/CMSNL can only supply the superseded Honda clamps (finished in a black painted finish) at a cost of £9.50 each. These have the ‘ribbed’ design and in my opinion just let down a concours/authentic restoration or rebuild.
The other issue with refurbishing original clamps is that quite often the original 5mm diameter clearance hole for the M4 screw (where the head of the screw ‘seats’ to provide the clamping force) suffers with deformation or ‘pull through’, which means that often very low clamping force is applied by the used clamp.
Consequently I’ve tooled up and had a small batch of reproduction clamps made to the original Honda specification for these machines.
This is as exact a replica of the OEM / Honda part as I could produce at a reasonable cost.
These are manufactured with modern ‘medium carbon / high manganese spring steel’, and finished in a BZP finish. I’ve also sourced new OEM M4 screws from Japan (correct JIS spec with the ‘dot’ on the screw head).
I’ll be selling these first batch of 20 sets as a complete set of 12, for £120/set plus shipping.
Please drop me a direct message with your shipping details if you’re interested in purchasing a set. I’m happy to ship worldwide at cost (I’m based in the UK).