Cb360 1976 Right hand switch

[Madagas2002]

Hi
I've re-soldered my wiring to the right hand switch
Someone had previously just cut them off.
I've been left with a brown/blue and a black wire.
Can I please ask for help on where these wires should go.
Thanks in advance
John

[Oddjob]

Black goes into any black connector on the loom. It's the switched feed for the kill switch.

Oddly the brown/blue also goes into a black connector, no idea why Honda did this but it's the feed to the tailight fuse in the fuse box, very odd.

[Bryanj]

Do you mean where do they go in the switch or where in the headlamp?

[Madagas2002]

Hi,
Thanks for your interest.
Yes, it's at the switch.
I've soldered the white stripe/black twin wire to the cut out switch.
I'm left with the black and blue/brown.
Thanks again
John

[Bryanj]

I used to have a genuine Honda manual for that but not sure if i still have for wiring diagram.
Is this an original UK one?