General > Announcements

400/4 fuelTap Filter .

(1/4) > >>

THUNDERDOWNUNDER:
Hi does anyone know where to get the rubber seal for the Filter assembly without buying the Whole set . Thanks .

McCabe-Thiele (Ted):

--- Quote from: THUNDERDOWNUNDER on April 15, 2023, 07:30:43 AM ---Hi does anyone know where to get the rubber seal for the Filter assembly without buying the Whole set . Thanks .

--- End quote ---

IIRC if it's the round tap seal the DS kit does not have the right size O ring so they supply two thinner ones. I ended up using the original one as it was in fair condition.The only other seal iirc is a fibre washer on the Union I think.

Julie might have something suitable - not sure.

McCabe-Thiele (Ted):
This was my tap when I dismantled it.





.Petrol Tap by Macabe Thiele, on Flickr

THUNDERDOWNUNDER:
Middle washer

McCabe-Thiele (Ted):
I'd try a PM to Nurse Julie first - the replacements will probably be Vitron type. Failing that measure it up & try some suppliers.

My strainer was in bits so I bought the kit.

Navigation

[0] Message Index

[#] Next page