speedo adapter plate

[Mcraig1982]

Any where in the uk sell these? postage is £££££

[Trigger]

Only ever seen them forsale in Germany 

[Bryanj]

If you want twin disc it may be possible to modify your original drive plate depending on the front hub. Does the hub have two flats on it

[Trigger]

Any where in the uk sell these? postage is £££££

Not a bad price. The one i bought was from the UK and that was £45 

[Mcraig1982]

Ive not had a proper look yet & I don't have the facilities to chop the original one down properly. Id rather buy a properly made plate.

The one from Germany looks well made, just costly postage 

[Bryanj]

I modified a plate with a vice, hacksaw and file

[Nurse Julie]

Is it for a 500 or 550?

[Mcraig1982]

76 500

I think the 500 & 550 are the same ?

[Nurse Julie]

76 500

I think the 500 & 550 are the same ?

The forks are different, there is no fitting point for a 2nd caliper arm on the 500 forks. They are completely different forks.

[Mcraig1982]

oh really? it looks like it has the bracket on the right side fork leg??

[McCabe-Thiele (Ted)]

Not able to zoom in on your right fork leg - if it has a calliper mounting point it should be a mirror image of the left side fork bolt lugs - four in total iirc.
Two top ones that hold fender & top arm pivot, large lower bolt, caliper adjustment bolt hole.

It depends what lower legs have been fitted.

[Bryanj]

Thats because its nothing like a standard 500, probably 550 forks, and riding without a mudguard/fork brace is asking for handling problems

[Mcraig1982]

? rides fine. Plus it never rains in the uk 

[Bryanj]

Wait till you hit a bump in a corner, without the brace the forks flex every which way

[robvangulik]

With that size front tyre handling won't be too good anyway
And the speedo will read too (s)low as well...