Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Noted many thanks. I think I’ve worked out what the main issue is with mine. I had tested the float valves and they seemed good, and each bowl reaches 50ml, so I couldn’t understand why the fuel was reaching the bowl joints. I think it’s because (on #3 & #4) the float pivot is binding very slightly on the brass rod. As it’s only 3&4, I’m going to try polishing those - the rod and the tubes it passes through, with very fine polishing paste, to get rid of any resistance. I’ll do the same with the gasket mating surfaces, and then test.