« previous next »
Pages: [1] 2 3 ... 5   Go Down

Author Topic: Oil feed to clutch cb750k  (Read 4271 times)

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Oil feed to clutch cb750k
« on: November 19, 2023, 08:39:54 AM »
Just run bike with the clutch cover off I don’t think it’s getting any oil to clutch the clutch is quite dry is there anyway I could check the oil feed pump seems to return oil to tank ok
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #1 on: November 20, 2023, 11:35:14 AM »
Just fitted a test oil gauge and idle pressure seems to be about 35psi  and at about 3000 to 4000 it is about 60psi this is with the engine hot just can’t understand why clutch drags so much (help me)
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #2 on: November 20, 2023, 02:11:28 PM »
Does anyone know what the hole in clutch centre is for
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2

Online McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6289
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #3 on: November 20, 2023, 04:08:53 PM »
« Last Edit: November 20, 2023, 04:30:41 PM by McCabe-Thiele (Ted) »
Logged
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #4 on: November 20, 2023, 05:41:02 PM »
Took clutch apart again no oil in central hole bike is a cb750k2
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2

Offline Oddjob

  • SOHC Jedi
  • Posts: 4296
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #5 on: November 20, 2023, 05:42:01 PM »
Second link looks like it could be the solution Ted. First link isn't very informative.

There is a mod to increase the oil flow to the clutch plates but if there's no oil in the first place it's kinda redundant.
Logged
Kids in a the back seat cause accidents.
Accidents in the back seat cause kids.

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #6 on: November 20, 2023, 06:08:56 PM »
I have changed the oil seal under bearings plate not sure if this is the plug
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8242
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #7 on: November 20, 2023, 06:21:22 PM »
It almost sounds like you have a blockage in the oilway to the clutch 🤔🤔.
Logged
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8242
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #8 on: November 20, 2023, 06:33:12 PM »
Quote from: Pauarc on November 20, 2023, 06:08:56 PM
I have changed the oil seal under bearings plate not sure if this is the plug
No, that's a bolt hole, I've circled the plug in red. But some of them didn't have the rubber bung, the gasket covered the oilway. Your bung looks like it's got a hole in it for some reason 🤔🤔🤔🤔
[ Guests cannot view attachments ]
« Last Edit: November 20, 2023, 06:34:48 PM by Nurse Julie »
Logged
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #9 on: November 20, 2023, 07:13:50 PM »
The plug may be worth a look if the plug is removed I could see if oil is there if I spin on starter motor
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8242
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #10 on: November 20, 2023, 07:23:45 PM »
Quote from: Pauarc on November 20, 2023, 07:13:50 PM
The plug may be worth a look if the plug is removed I could see if oil is there if I spin on starter motor
Yes, if you're not getting any oil out of that chanel, that could suggest a blockage somewhere.
« Last Edit: November 20, 2023, 07:25:52 PM by Nurse Julie »
Logged
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #11 on: November 20, 2023, 07:34:21 PM »
There is a good return to oil tank so hopefully may be that?? Keep fingers crossed 🤞
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8242
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #12 on: November 20, 2023, 07:48:41 PM »
Quote from: Pauarc on November 20, 2023, 07:34:21 PM
There is a good return to oil tank so hopefully may be that?? Keep fingers crossed 🤞
Yes, fingers crossed, if you've got enough pressure for the oil to return to the tank, you should get oil out of that hole once the bung is removed. When you've removed the bung, take a photo of it so I can see if its a proper bung or something that someone has made at home.
Logged
LINK TO MY EBAY PAGE. As many of you know already, I give 10% discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Oddjob

  • SOHC Jedi
  • Posts: 4296
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #13 on: November 20, 2023, 08:30:32 PM »
Looks like sealant not a bung to me
Logged
Kids in a the back seat cause accidents.
Accidents in the back seat cause kids.

Offline Pauarc

  • SOHC Member
  • Posts: 209
    • View Profile
Re: Oil feed to clutch cb750k
« Reply #14 on: November 21, 2023, 07:44:41 AM »
Hopefully l have time at weekend to look at it I will keep you updated thanks for help
Logged
Honda 90ss, Cb250k1 supper sport,
Cb400 four, CB750k7, Cb550, Cb750f2n,
Cb750k2
Pages: [1] 2 3 ... 5   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal