Author Topic: Is my cam tensioner too far gone?  (Read 428 times)

Offline SteveW

  • SOHC Pro
  • Posts: 592
    • View Profile
Is my cam tensioner too far gone?
« on: February 11, 2024, 04:43:41 PM »
I have a few hair line cracks but only at each end, should I replace?

1974 CB550 K0
1980 CB650
2000 CBR929RR Fireblade
1966 Lambretta LI150 Series 3
1981 RD350LC
1972 Raleigh Chopper
1974 Raleigh Tomahawk
2011 Henry Hoover

Offline Laverda Dave

  • SOHC Jedi
  • Posts: 2581
  • Health is wealth
    • View Profile
Re: Is my cam tensioner too far gone?
« Reply #1 on: February 11, 2024, 05:21:52 PM »
If it was mine and the engine was that far apart I would change it. Hairline cracks indicate it is about to break up. Think about hairline cracks on a cam belt in a car engine, it would be considered to be overdue for a replacement. You don't want to reassemble the engine only to have the tensioner break up at speed.
1976 Honda 400/4
1977 Rickman Honda CR750
1999 Honda VFR 800FX
1955 750 Dresda Triton
1978 Moto Morini 350 Sport
1978 Honda CB400/4 'Rat' bike
1982 Laverda 120 Jota

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 6287
    • View Profile
Re: Is my cam tensioner too far gone?
« Reply #2 on: February 11, 2024, 06:34:29 PM »
I agree with Dave yes it's another expense but you get peace of mind.👍
Honda CB500 K1 (new pit dug out ready)
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html

Offline davidcumbria

  • Such great knowledge and support on here 👍
  • SOHC Expert
  • Posts: 285
    • View Profile
Re: Is my cam tensioner too far gone?
« Reply #3 on: February 11, 2024, 06:35:42 PM »
Mine was like that and I replaced the blade with an aftermarket one from Cms. It seemed to have  less spring than the one I took out so I would go for an oem replacement if I were you.
500/4 in 79. No bikes for 30 years. 750/4 in 2013, 550/4 in 2023. Also own  R1100GS, RD350LC YPVS , Triumph Street Triple, Yamaha XT250

Offline SteveW

  • SOHC Pro
  • Posts: 592
    • View Profile
Re: Is my cam tensioner too far gone?
« Reply #4 on: February 11, 2024, 08:29:08 PM »
Silvers has the entire assembly for £170 ish, Wemoto has just the blade part which is all I need for £45.
1974 CB550 K0
1980 CB650
2000 CBR929RR Fireblade
1966 Lambretta LI150 Series 3
1981 RD350LC
1972 Raleigh Chopper
1974 Raleigh Tomahawk
2011 Henry Hoover

Offline davidcumbria

  • Such great knowledge and support on here 👍
  • SOHC Expert
  • Posts: 285
    • View Profile
Re: Is my cam tensioner too far gone?
« Reply #5 on: February 11, 2024, 10:06:00 PM »
At that price it’s probably aftermarket. Cms has the original blade for £91 and aftermarket for £34. I cheaped out but then wished I hadn’t.
500/4 in 79. No bikes for 30 years. 750/4 in 2013, 550/4 in 2023. Also own  R1100GS, RD350LC YPVS , Triumph Street Triple, Yamaha XT250

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal