SOHC.co.uk Forums > CB350/400

CB400F Throttle cable A & B lengths

(1/6) > >>

AshimotoK0:
Does anyone know the CB400F Throttle cable A & B lengths please?

Have some similar cables mixed up (eg CB250/360G5) and I need to identify which are indeed for the 400F

Bryanj:
Didnt the honda cables have the middle part number on them Ash

AshimotoK0:

--- Quote from: Bryanj on February 27, 2024, 11:21:20 PM ---Didnt the honda cables have the middle part number on them Ash

--- End quote ---

Only markings are TSK and Made in Japan Bryan. I think one is deffo Genuine but need to work out if for a 400F Anyone else can measure one for me please.

AshimotoK0:
This is what 4 into one say.

Honda part numbers:
Throttle Cable A - Pull - 17910-377-000
Throttle Cable B - Push - 17920-377-000

Dimensions:
Throttle Cable A - Pull
35.25" Total Length - 31.25" Inner Housing - 4" Slack
M10 Throttle side thread in
Throttle side cable stop = 6mm Diameter x 7mm Wide
Carburetor side cable stop = 6mm Diameter x 10.25mm Wide
In line carburetor side cable adjuster
M6 cable adjuster on the carburetor side.

Throttle Cable B - Push
36" Total Length - 32.25" Inner Housing - 3.75" Slack
M12 Throttle side thread in
Throttle side cable stop = 6mm Diameter x 7mm Wide
Carburetor side cable stop = 6mm Diameter x 10.25mm Wide
M6 cable adjuster on the carburetor side.

Fits Honda:
CB400F Super Sport - 1975-1976 (Does not fit 1977 model with stock handlebars)

Aye Gee 1977:
Aren't the throttle and the carburettor at the same end of the cable?

The twistgrip is typically at the other end.

Navigation

[0] Message Index

[#] Next page