Author Topic: hi from kent  (Read 1820 times)

Offline joeleeman

  • SOHC Associate
  • Posts: 71
    • View Profile
hi from kent
« on: September 26, 2010, 06:01:57 PM »
hi my names Joe am from north Kent, me and my dad recently got a 750 from a friend for free!
in absolute pieces and a state so we decided we're going to rebuild it into a cafe racer now. not sure what year or and thing last letter on the reg is a t so i assumed a '77.
will put up a project thread once we start getting into the swing of things

Offline UK Pete

  • SOHC Jedi
  • Posts: 2696
    • View Profile
Re: hi from kent
« Reply #1 on: September 26, 2010, 06:15:35 PM »
Hi Joe welcome to the site, good luck with your project, see if you can upload some photos it could be a f2 model, does it have a tail piece or just a mudguard at the back
pete

Offline Bryanj

  • Grogu
  • *
  • Posts: 10822
    • View Profile
Re: hi from kent
« Reply #2 on: September 27, 2010, 01:56:44 PM »
Or put up the frame and engine number

Offline joeleeman

  • SOHC Associate
  • Posts: 71
    • View Profile
Re: hi from kent
« Reply #3 on: September 27, 2010, 07:13:00 PM »
the most i can get off the frame is cb750k-2 then a load of other digits (light not working in garage)

Offline Bryanj

  • Grogu
  • *
  • Posts: 10822
    • View Profile
Re: hi from kent
« Reply #4 on: September 28, 2010, 06:18:23 AM »
There are no Honda frame numbers starting CB750K, if thats what is stamped on there its a dodgy frame!

Offline SteveD CB500K0

  • Administrator
  • SOHC Jedi
  • Posts: 4463
  • Ride on the Steel Breeze...
    • View Profile
    • Steve's Blog
Re: hi from kent
« Reply #5 on: September 28, 2010, 07:53:14 AM »
Are you sure its not just CB750-2xxxxxxx ?
2022 Tiger Sport 660
1971 CB500K0

Offline joeleeman

  • SOHC Associate
  • Posts: 71
    • View Profile
Re: hi from kent
« Reply #6 on: September 28, 2010, 09:32:36 PM »
there is a number/letter before the cb750k part and there the load of numbers i cant make out

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal