I can't find an exhaust

[Mitchv60]

Evening chaps.
As the cafe project toodles along I've started to mess with the frame so I now have to decide on what exhaust I need.
I really only want to fit a stainless 4-1 system but the problem is finding one.After spending hours looking I've only found 2 and there both in the US.
I had decided on a Yoshi replica from Lossa Engineering which I was going to order today but in there ultimate wisdom there now only steel not stainless.
The other gut I found in the US won't import to the UK.

Can anyone help?

[LesterPiglet]

Pm Steph550. She had a stainless system made recently.

[Mitchv60]

Thanks for the reply but I think a custom made is going to be to expensive.

Has any one had any dealings with either the MAC 4-1 or the Marshall 4-1 deeptone?
Thought they both looked ok for chrome,just wondered about fit and finish.

[Bryanj]

Any aftermarket chrome exhaust will "Blue" on the bends as they are single skinned against the original double skinned.

I have fitted a Marxshall to a 550 and the fit and initial finish was good, as was the exhaust note---in fact under the current rules a dubious MOT pass--- but had to modify the silencer hanger as it varies depending on which frame its going on----By the way DO NOT cut aff the rear footrest hangers until after you have decided on an exhaust as a lot of them mount there!

[Mitchv60]

Thanks for the reply,
I won't actually be fitting the exhaust for at least 6 months but I need it to make sure everything is in place before the frame gets powder coated.As you say the last thing I want to do is find yjeres a support missing after that's been done.