Author Topic: Painting plastic ??  (Read 1205 times)

Offline cb750stu

  • SOHC Expert
  • Posts: 262
    • View Profile
Painting plastic ??
« on: November 15, 2012, 08:42:55 AM »
Hi Folks im wanting to tidy up my airbox its a bit scruffy and faded,

What would be the best way to paint it do i need special paint /primer etc ??

Regards

Stuart
1976 CB750 F1 SS in bits !!! but getting there

Offline Spitfire

  • SOHC Master
  • Posts: 1777
    • View Profile
Re: Painting plastic ??
« Reply #1 on: November 15, 2012, 09:40:41 AM »
Hi Stuart, when I repainted the side panels on my F1 I used Halfords plastic primer and then selected the nearest colour in their car range (I think it was graphite grey), as usual preparation time is critical, lots of sanding and wet and dry before the primer coat.

Whoops forgot about the clear coat at the end (Halfords)

Cheers

Dennis
« Last Edit: November 15, 2012, 01:08:31 PM by Spitfire »
1976 CB750F

1977 CB750F2 In bits

1964 BSA A65R In bits

Offline Bryanj

  • Grogu
  • *
  • Posts: 10808
    • View Profile
Re: Painting plastic ??
« Reply #2 on: November 15, 2012, 12:25:01 PM »
First use adhesion promoter, then primer, then colour, then laquer. Locally we have a trade paint supplier who will put it all in aerosol cans but they do cost over £10 each

Offline cb750stu

  • SOHC Expert
  • Posts: 262
    • View Profile
Re: Painting plastic ??
« Reply #3 on: November 18, 2012, 10:52:00 AM »
Thanks guys I'll have a look in Half words

Can you get lacquer in satin finish ???

Cheers
1976 CB750 F1 SS in bits !!! but getting there

Offline Bryanj

  • Grogu
  • *
  • Posts: 10808
    • View Profile
Re: Painting plastic ??
« Reply #4 on: November 18, 2012, 12:09:07 PM »
Forget half gits, try your yellow pages for a local paint/panel supplier

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal