Author Topic: Disc lock  (Read 1403 times)

Offline Oldbuthopeful

  • SOHC Associate
  • Posts: 51
    • View Profile
Disc lock
« on: January 10, 2013, 12:18:04 AM »

Can anybody out there recommend a lock for the front disc on my 350Four?  Hauling the conventional lock and chain around is a bit of a chore !

Offline Bryanj

  • Grogu
  • *
  • Posts: 10814
    • View Profile
Re: Disc lock
« Reply #1 on: January 10, 2013, 07:48:09 AM »
From memory there are not many that fit due to the width of the disc from edge to carrier but i seem to remember Oxford used to make one

Offline Oldbuthopeful

  • SOHC Associate
  • Posts: 51
    • View Profile
Re: Disc lock
« Reply #2 on: January 10, 2013, 08:52:48 PM »

Thanks Bryanj.  I've not come across the Oxford product in my search but have in fact just found a whopping great
padlock called Lox on Ebay. It has a shackle dimension of 72mm and is shown fitted to a disc, albeit on a modern bike.

I'm about to fire off a question to the sellers asking for the 'shoulder' measurement  -  critical because there's so little
room between the back face of the disc and the spokes, low down towards the spindle where the lock would have to be fitted.  I'll let you know how I get on  -  might be following-up the Oxford!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal