yoshimura 460 head gasket

[taminator]

Anyone know yoshimuira dealer , looking for a 460 big bore kit  head gasket , thanks tommy.

[ka-ja]

HI,
     Got one from "Cruisin Image" of Japan, via Ebay, its for the 466cc but as close as not matters for the 460cc, only 10 days coming and pretty decent on cost--------Ken

[ka-ja]

HI,
      Try     http://www.ebay.co.uk/itm/75-77-HONDA-CB400F-BIGBORE-HEAD-GASKET-CI-CB400FGS-1-/251240107812?pt=UK_Motorcycle_Parts&hash=item3a7f13cf24

        PS do not trust my computer skills-----Ken

[taminator]

Hi ken, have tried cruzin , but the they say that their gasket doesn't suit the yosh 460 kit , thanks for trying to help , all the best tam .

[ka-ja]

Hi,
     I had the same answer from them-non commital, but would say suzuki recommend its correct sized/rated suzuki o-ring to fit a Honda-no. All I can say is that the dimensions and thickness are OK, and If it does not work for you, I will donate my home made solid copper gasket (5,000 miles and no trouble) to your cause, as I am rebuilding with the one from Japan.
     PS I have been told their piston rings also will fit with a little end clearance adjustment, and the 466cc kit will come in handy if the yoshi piston/ bores wear

[Dan]

For anyone that is interested, there is a NOS Yoshi piston kit on eBay atm. 54mm pistons, head gasket etc. £599.

[taminator]

Hi,
     I had the same answer from them-non commital, but would say suzuki recommend its correct sized/rated suzuki o-ring to fit a Honda-no. All I can say is that the dimensions and thickness are OK, and If it does not work for you, I will donate my home made solid copper gasket (5,000 miles and no trouble) to your cause, as I am rebuilding with the one from Japan.
     PS I have been told their piston rings also will fit with a little end clearance adjustment, and the 466cc kit will come in handy if the yoshi piston/ bores wear

  hi ken, very nice of you to offer , I will order one and see how it works, who would you recommend for rebore work, thanks tommy.

[taminator]

Yes  I seen that kit , need a wee lottery win for that.

[ka-ja]

Hi Tommy,
                 Cannot help with a recommend for a rebore as I did my own machining before I retired, I could give some addresses but do not know how good, best of luck with your search-----------Ken