Neutral switch connection

[Seamus]

Silly question but how does the wire attach to the switch?
Received a 400/4 in parts to assemble and I did not take it apart. Wondering if something is missing.
Thanks in advance

[hairygit]

There should be a little tiny (easily lost! ) bolt in the top of it, and the single wire has an eye terminal on it, which is held by the bolt

[Seamus]

Thanks mate. Appreciate the quick reply. Is the bolt a phillips type head screw?

PS do you still want the barrels?

[steven400/4]

mine has a spring witch you push down then put your wire in the hole let spring go and it holds it in place

[Seamus]

Thanks Steven, I will have a closer loook tomorrow and see which type I have. (Guess there are two). The wire to mine does not have a loop to fit a screw, so possibly the same as yours. (I hope so as I dont have the screw)

[Seamus]

Correct for your type Steven. Poked it through the little hole under the spring. Thanks for the heads up on that one.

[steven400/4]

no problem mate