« previous next »
Pages: [1]   Go Down

Author Topic: cb750 wiring loom  (Read 1055 times)

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
cb750 wiring loom
« on: December 10, 2013, 11:15:17 AM »
Hi Guys,
Just wondered if any one has bought a new loom recently.I did and fitted it yesterday with little problem as switch gear slightly different for the loom.After all connected and working there was 2 wires left over blue and orange same as for the winkers and I gave them a slight tug and they came right out of the harness about a foot long.After I closed her all up, all still works so I just scratched my head and thought WTH.Any one else come across this or did they just ignore the left overs?
Cheers
Bitsa
Originated from CSML
Logged
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach

Offline hairygit

  • SOHC Jedi
  • Posts: 2708
    • View Profile
Re: cb750 wiring loom
« Reply #1 on: December 10, 2013, 12:28:21 PM »
They could be for  U.S.market models which have twinfilament  bulbs in the front indicators, to act as "clearance lights", but aren't used in europe

Sent from my GT-S5839i using Tapatalk 2

Logged
If it's got tits or wheels, it's hassle, if it's got both, RUN!!!

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
Re: cb750 wiring loom
« Reply #2 on: December 10, 2013, 01:56:29 PM »
You might be right there Hairygit but they were not connected to FA.Like I said about a foot and thats it.
Cheers
Bitsa
Logged
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal